<bdo id="zqdq9"><thead id="zqdq9"><mark id="zqdq9"></mark></thead></bdo>

<source id="zqdq9"></source><bdo id="zqdq9"><tr id="zqdq9"></tr></bdo>
<nobr id="zqdq9"></nobr>
  • <menuitem id="zqdq9"><tr id="zqdq9"><legend id="zqdq9"></legend></tr></menuitem>
    <bdo id="zqdq9"></bdo>
      COMPANYHONNORORGANIZATION
         Position:Home | Trends
         
      GATE: external direct
      •; GATE: external direct (opposite side of the hinge). Flow direction should climb over the gasket side.
      •; EJECTION: ejector pins (ø; 10 mm) on bosses connected to the wall by a rib (thickness= 3 mm max) and other ejector pins on the bottom in bas-relief.
      •; SLIDES: no slides are necessary.
      •; MOULD PARTING: use the plane passing through cylinder axis and through the center of lateral appendage.
      •; GATE: on the side of cylinder (opposite side of appendage).
      •; SLIDES: nr. 2 horizontal slides:
      1. For cylindric internal part,
      2. For appendage internal part and for cylinder upper face (to the end of the radius).

      •; GATE: external direct (opposite side of the hinge). Flow direction should climb over the gasket side.
      澆口:外部方向(鉸鏈對面)。流向須爬過襯墊側。
      •; EJECTION: ejector pins (ø; 10 mm) on bosses connected to the wall by a rib (thickness= 3 mm max) and other ejector pins on the bottom in bas-relief.
      澆鑄:通過筋板(最大厚度= 3 mm)連接到墻板上的模板上的頂桿(ø; 10 mm)和在型腔底部上的其他頂桿。
      •; SLIDES: no slides are necessary.
      滑塊:不需要。
      •; MOULD PARTING: use the plane passing through cylinder axis and through the center of lateral appendage.
      模具分型面:利用通過圓柱軸線和側面附加件的中心的平面
      •; GATE: on the side of cylinder (opposite side of appendage).
      澆口:圓柱的側面(附件的對面)
      •; SLIDES: nr. 2 horizontal slides:
      滑塊:2號水平滑塊
      1. For cylindric internal part,
      圓柱內部件
      2. For appendage internal part and for cylinder upper face (to the end of the radius).
      附件內部件和圓柱頂面(到圓弧的端部)
      PYRIGHT @ Fujian Fuzhou Chengchang Machinery Co,.Ltd ALL RIGHTS RESERVED
      WEBSITE:www.910qq.com
       
      国产一级a一级a爰片免费_久久精品国产亚洲AV高清_亚洲有无码中文网_玖玖爱在线视频这里只有国产中文精品39
      <bdo id="zqdq9"><thead id="zqdq9"><mark id="zqdq9"></mark></thead></bdo>

      <source id="zqdq9"></source><bdo id="zqdq9"><tr id="zqdq9"></tr></bdo>
      <nobr id="zqdq9"></nobr>
    1. <menuitem id="zqdq9"><tr id="zqdq9"><legend id="zqdq9"></legend></tr></menuitem>
      <bdo id="zqdq9"></bdo>